I have used an RS232c to RS485 converter and connect it to RJ45 connector to connect with SLC500 485 channel communication using rslinx. It is working fine.
But I could not see the panelview 550 in rslinx which was connected to PLC via RS232>DH485 (Aic converter).
And If I connect RJ45 connector directly to panelview, it doesn't show anything via RSLinx.
Can somebody help how I can directly connect to panelview just to load the program.
Thanks
But I could not see the panelview 550 in rslinx which was connected to PLC via RS232>DH485 (Aic converter).
And If I connect RJ45 connector directly to panelview, it doesn't show anything via RSLinx.
Can somebody help how I can directly connect to panelview just to load the program.
Thanks