Difference betwen RSView and Factory Talk
- Thread starter rgeorgii
- Start date
OkiePC
Lifetime Supporting Member
Factory Talk is the new name for RSView except for RSView32 which has retained its original name.
Similar Topics
We have remote IO 1734-AENTR and all of them seem to be recognized in Logix except in, RIO-5000. When we look at the revision, all the ones that...
From a FAT it appears that a struct containing bits/int/real can't be sent from a 1513 to a 1200.
When using two 1513 there is no issue.
Total...
Hello,
I have a problem with AO- and AA-Tags.
When I use for example the tag AO_Test with the address 200 and type the value 1,2 in, the AA-Tag...
Hi;
We installed an orifice plate type steam flow transmitter which configured to give 4-20mA signal correspond to 0-9ton.
I given that signal...
As per the title. This might seem like a basic question to many, but I'm unclear about the difference between a coil ( ) and an application...