wildcatherder
Member
I have several numeric inputs from a C-more EA7 panel that set timer reset values. I find that when I enter a number (of seconds) and store it in a memory register that I have to multiply it by 14.7 to get it to agree with my stopwatch. The timers are the basic built-in DirectSoft timers, whose specs indicate the input value should be tenths of a second.
What would cause this discrepancy?
My RLL is only about 30 rungs long and the multiply and divide operations are probably the most time-consuming operations. The timers are used to step an event-driven drum.
What would cause this discrepancy?
My RLL is only about 30 rungs long and the multiply and divide operations are probably the most time-consuming operations. The timers are used to step an event-driven drum.