P90 Toter
Member
I have not been able to get the elapsed time from a timer in a Siemens Simatic S7-1200 to display correctly on a Red Lion G315 HMI. I have searched this forum and have seen some related posts but not quite the same problem as what I am having. The elapsed time is is stored in a DWord I believe as data type Time. It gets to the HMI ok but I cannot seem to get it to display correctly. I am looking for it to display either the whole time value as Minutes:Seconds:Milliseconds or just Minutes:Seconds will work just as well. It is a ten minute timer so I don't need hours unless that is the only way to get it to display correctly. I have a feeling this has been explained before but I cannot find it. I noticed that my crimson software is a little outdated by a few releases so I am already updating it. Any help is appreciated and please keep it as simple as possible.