Dl06

Amos

Member
A
Join Date
Apr 2003
Location
Montana
Posts
6
Hi
Is it posible to count frequence with a dl06? At the moment I have it working but I am using lader logic to reset the counter but it is subject to scan time so it it not very acurate. I tried using an interupt but I couldn't get it to work. An eazy solution would be to use a h0cntr module but this is only temperary.Any sugjestion would be apreciated. Thank You
 

Similar Topics

Rsflipflop256
Analog programming in Direcstsoft 6 / DL06
Hi, Mostly AB guy here with a little Koyo experience, but all of its digital. I get handed three analog I/O cards and asked to prove that they...
Replies
6
Views
503
Cheeseface
C
Rsflipflop256
Automation direct DL06 questions
Hi all, I am making a test rig to be able to wire in any DL06 (or DL05) And create a HMI in red lions crimson 3.1 to test all the inputs and...
Replies
4
Views
935
arpus4KM
A
Rsflipflop256
DL06 with C-More screen BCD timer
I have a Cmore screen which is communicating to the DL06 in BCD and need to create a timer that works in real numbers for a test, I simply need to...
Replies
3
Views
2,159
Rsflipflop256
Rsflipflop256
D
DL06 Losing Port 2 Configuration During Power Outage
I have a client that has many Automation Direct DL06 PLCs for a municipal water/wastewater system. When there is a power outage, one of the sites...
Replies
4
Views
2,447
Jim3846
J
mylespetro
DirectSoft 6 / DL06 Programming
Hey everyone, Working on a system with a Koyo DL06 processor and it's my first experience with them. I have DirectSoft 6 and we got the program...
Replies
5
Views
2,341
mylespetro
mylespetro
Back
Top Bottom