Guest
Guest
G
I am required to make an HMI of a PLC2 program. The problem is there is no existing softcopy of the program. Therefore, I need to upload the program from the plc.
I was told that I can use the PLC Communicator from austglobal.com. I've already downloaded a copy of the software.The problem is I don't know what cable to use aside from the "Smart Cable" also from the same site.
Please help me with this!
I was told that I can use the PLC Communicator from austglobal.com. I've already downloaded a copy of the software.The problem is I don't know what cable to use aside from the "Smart Cable" also from the same site.
Please help me with this!