E62 fault in kinetix 7000 drive

rejoe.koshy

Member
R
Join Date
Dec 2011
Location
kolkata
Posts
195
I have a kinetix 7000 servo drive installed at my end which has suddenly started malfunctioning .It displays a fault code E62 when ever MAM command is issued .This is unusual as no auxiliary devices are connected & the servo is configured in position servo mode.What could be cause of such an abnormal behaviour? Pls help.....

Thanks,
joe
 

Similar Topics

B
Kinetix6000 E62
Hello, I got E62 on Kinetix6000 servo drive. I have checked feedback cable end to end all are good connection. There are 9 wires connected. In...
Replies
7
Views
2,807
DarrylR
D
T
AB Kinetix 6000 2094-BM02-S E62 error
Let me start with, I know nothing about Kinetix 6000 or Sercos. We have a machine that we've bought that we're trying to refurbish to sell on -...
Replies
2
Views
3,194
jstolaruk
J
E
1747-sn FAULT
hello I am getting a 57h fault - Specialty I/O module has not responded to a lock shared memory command within the required limit. Fault randomly...
Replies
2
Views
82
Etech883
E
K
Kinetix configuration fault Command Notch Filter Width Undefined attribute
Kindly, we have the following configuration fault on a Kinetix 5700 axis. It only appears when we go online on the Plc. We are just starting the...
Replies
2
Views
99
Kataeb
K
B
Kinetix 5300 MSO causing ExcessiveVelocityErrorFault
Have a system that has been running for over a year and all of a sudden getting a ExcessiveVelocityFault on one of the drives when the MSO command...
Replies
2
Views
150
padees
P
Back
Top Bottom