Deer
Member
- Join Date
- Jun 2002
- Posts
- 124
Hi All,
I have a problem with my SLC 5/03, there is a fault on the processor.
With RSLogix 500 the faulty is 152h (there is a missing or remove I/O's on the slot 1).
Actually, I have checked I/O Configuration on the RSLogix 500, and there are match between I/O configuration list on the RSLogix 500 with I/O's on the chassis.
I have try to replace I/O on the slot 1 (1746-ITB16)with the new one, but the problem still persist.
Chassis? yes, I have replace also, but the problem still there.
Processor ? for this one, I can't replace because program already set as "ALLOW FUTURE ACCESS", unfortunately, we don't have off line program, so we can't try to upload program from old processor and download to the new one.
Any Idea??
Regards,
Deer
I have a problem with my SLC 5/03, there is a fault on the processor.
With RSLogix 500 the faulty is 152h (there is a missing or remove I/O's on the slot 1).
Actually, I have checked I/O Configuration on the RSLogix 500, and there are match between I/O configuration list on the RSLogix 500 with I/O's on the chassis.
I have try to replace I/O on the slot 1 (1746-ITB16)with the new one, but the problem still persist.
Chassis? yes, I have replace also, but the problem still there.
Processor ? for this one, I can't replace because program already set as "ALLOW FUTURE ACCESS", unfortunately, we don't have off line program, so we can't try to upload program from old processor and download to the new one.
Any Idea??
Regards,
Deer