desertsurf520
Lifetime Supporting Member
So, I finally got versioin 27 installed on my Windows 10 VM. However, now I can't upload a project from my lab controller. I have the above error message failed to create project file, library not registered.
There's a tech note on it but I can't untill the E300 AOP. I really don't want to uninstall any versions of Studio bc it took a lot of work to install them all in the first place.
Anybody have better help on this. It looks like I have the E300 on my machine but not completely installed. I can't seem to uninstall it through CMD Prompt.
Thanks
There's a tech note on it but I can't untill the E300 AOP. I really don't want to uninstall any versions of Studio bc it took a lot of work to install them all in the first place.
Anybody have better help on this. It looks like I have the E300 on my machine but not completely installed. I can't seem to uninstall it through CMD Prompt.
Thanks
