Dear Friends;
We have Allen Bradley Panel View “Panel View plus 1000” with Compact Logic PLC. I faced a problem with panel view that it had two program files in its “Internal” memory name “530557p1_Jb.mer” and “530557p0_Jb.mer” and the first one was operational (there was no memory card). I wanted to run the second file (finally), so I deleted the first file (530557p1_Jb.mer), loaded the second one (530557p0_Jb.mer) and run the project. Every thing was ok but when I cycled the power, the panel view displayed an error (picture attached) that system could not found the file 530557p1_Jb.mer while it was deleted and the other one loaded. I could understand the problem so I renamed the second file “530557p0_Jb.mer” as ‘530557p1_Jb.mer’, run the project and found no error appeared after cycle the power.
I want to know what I made mistake that I faced such problem and how to prevent it occurring again.
We have Allen Bradley Panel View “Panel View plus 1000” with Compact Logic PLC. I faced a problem with panel view that it had two program files in its “Internal” memory name “530557p1_Jb.mer” and “530557p0_Jb.mer” and the first one was operational (there was no memory card). I wanted to run the second file (finally), so I deleted the first file (530557p1_Jb.mer), loaded the second one (530557p0_Jb.mer) and run the project. Every thing was ok but when I cycled the power, the panel view displayed an error (picture attached) that system could not found the file 530557p1_Jb.mer while it was deleted and the other one loaded. I could understand the problem so I renamed the second file “530557p0_Jb.mer” as ‘530557p1_Jb.mer’, run the project and found no error appeared after cycle the power.
I want to know what I made mistake that I faced such problem and how to prevent it occurring again.