Error communicating clp's Rockwell

[SternTech]

Hello, I have the following error when trying to send a message PLC CompactLogix L23E QB1B for PLC MicroLogix 1100. Attached hereto error.

Thanks!!

 

[SternTech]

Can you help me bernie_carlton?
Need urgent help!!

Thanks!!

 

[Andybr]

You have got the path wrong in your message instruction. I am not 100% sure for your particular combination of PLC's but I would try LocalENB,2,192.168.1.144

 

[SternTech]

Hi Andybr

If I put "LocalENB" the Path it generates me an error Error Path: Path Error: LocalENB, what can this be?

Thank you !!

 

[Andybr]

Just try 2,192.168.1.144 then. The ENB reference may not be needed for the L23 processor. The 2 is the actual ethernet port so this will always be in front of the IP address.

 

[SternTech]

Hi Andybr

And also tried the same mistake from the beginning, do not know if you understand me, but I want to send a message L23E CompactLogix PLC for the MicroLogix 1100.

Thank You!!

 

[SternTech]

You know what I can do Andybr?

 

[widelto]

Try attached file.

 

[SternTech]

Hello to all, already managed to solve my problem, I want to thank everyone who helped me !!

Thank you !!