Guys, I use serial kepserver port id's in "network communication" of the PanelView Plus 600 to contact with a PLC Simatic 545 and PanelView. Kepserver already communicates it with simatic 545 using driver simatic 505 and I do not have problem in that. In PanelView Plus 600 I already have installed kepserver but when I give in serial port him ids it indicates ERROR "failed to me to launch kepware serial communicaciton dialog".
Error Kepware in PanelView
- Thread starter jrangel13
- Start date
Similar Topics
I’m attempting to configure KEPWare to poll a Modbus device via Modbus TCP/IP. However, everything I’ve tried results in an error being reported...
Hi All
Long time reader first time poster.
I have developed a kepware kepserver project for an Allen Bradley 6 Panelview - Omron PLC via serial...
I'm running Factory Talk View ME 8.00 and KEPserver Enterprise 5.3 in order to have a Panelview Plus talk to a remote serial device via Modbus...
I am kind of new to GE products, but we have several in my area. I made a minor logic change and it verified good, but when I tried to download I...
Hi,
I'm currently having issued with a PowerFlex 252. It was working fine last week, and suddenly decided to stop working. When I go into...