dineshdhav
Member
Hi All ...
In one full plant, all machines are connected to networks.
above 500 ip address...
that consists of plc,servo,hmi and third party devices also
PLC,HMI,SERVO are Rockwell..
These are all connected to one PC for capturing data.
ip address example
10.215.9.15
255.255.0.0
10.215.0.1
Now, my problem is
Sometimes the hmi or servo gets a communication error and the machine is stopped. After unplugging and plugging the hmi or servo cable, it works fine.
and 1734-AENT also getting error sometimes. After we do unplug and plug the cable it is working good ..
Tell me the solution ...
Thanks in advance
In one full plant, all machines are connected to networks.
above 500 ip address...
that consists of plc,servo,hmi and third party devices also
PLC,HMI,SERVO are Rockwell..
These are all connected to one PC for capturing data.
ip address example
10.215.9.15
255.255.0.0
10.215.0.1
Now, my problem is
Sometimes the hmi or servo gets a communication error and the machine is stopped. After unplugging and plugging the hmi or servo cable, it works fine.
and 1734-AENT also getting error sometimes. After we do unplug and plug the cable it is working good ..
Tell me the solution ...
Thanks in advance