Hi all
I have som problems communicating with a 9300 servodrive from Lenze over the devicenet via explicit message. Im using RSNetworks "Class instance editor" but i cant seem to get through to the drive. I wondered if anybody had experience with this, and also the program in RSLogix 500 that i could use for explicit message. By the way - i have made a SLC500 program for explicit message to a range of Lenze 8200 frequency converters and that works fine, but i cant use the same program for the servodrive, for some odd reason.
Thanx for your help
I have som problems communicating with a 9300 servodrive from Lenze over the devicenet via explicit message. Im using RSNetworks "Class instance editor" but i cant seem to get through to the drive. I wondered if anybody had experience with this, and also the program in RSLogix 500 that i could use for explicit message. By the way - i have made a SLC500 program for explicit message to a range of Lenze 8200 frequency converters and that works fine, but i cant use the same program for the servodrive, for some odd reason.
Thanx for your help