stallone
Member
Hello all,
I am trying to establish comms with between my laptop and my Panelview plus 700.
I am using Factory Talk view studio 5.10.00
i have rslinx classic gateway 2.55.00.16
I can browse to my network using Rslinx classic gateway and i can see everything attached to the network, plc, hmi's everything.
I have the correct IP address setup as i can ping everything no problem.
My problem is when i am inside factorytalk studio and i click on the communications tab and try browse, i see nothing, i try expand the ethernet branch but nothing is visble.
I did notice that the browse window inside factorytalk view shows rslinx enterprise. not sure if this is a problem or not.
2 days ago i went online with me transfer utility and uploaded all the hmi programs, but today i cannot see anything in transfer utility or factorytalk view.
I am using vm ware, i am running windows 7 on my normal machine and windows xp on my VM. I have set it up with the main windows 7 having an ip address in the range of my plc and in the vm ware image i have no ip address,
but like i say i can see everything if i browse in rslinx.
please help, not sure what i am missing.
p.s. sorry for the long babbling post
I am trying to establish comms with between my laptop and my Panelview plus 700.
I am using Factory Talk view studio 5.10.00
i have rslinx classic gateway 2.55.00.16
I can browse to my network using Rslinx classic gateway and i can see everything attached to the network, plc, hmi's everything.
I have the correct IP address setup as i can ping everything no problem.
My problem is when i am inside factorytalk studio and i click on the communications tab and try browse, i see nothing, i try expand the ethernet branch but nothing is visble.
I did notice that the browse window inside factorytalk view shows rslinx enterprise. not sure if this is a problem or not.
2 days ago i went online with me transfer utility and uploaded all the hmi programs, but today i cannot see anything in transfer utility or factorytalk view.
I am using vm ware, i am running windows 7 on my normal machine and windows xp on my VM. I have set it up with the main windows 7 having an ip address in the range of my plc and in the vm ware image i have no ip address,
but like i say i can see everything if i browse in rslinx.
please help, not sure what i am missing.
p.s. sorry for the long babbling post