FactoryTalk View SE Redundancy

[keithb]

Hi

I've just set a pair of redundant servers and 2 clients in FT View SE. No problems there, but how can I display something on the view clients to show which is the active server? I've trawled through the system and the manuals, but I can't find anything to do this. Any help appreciated.

 

[akreel]

Have you checked the knowledgebase?

I know there's an article out there, because we used it. It was written for CPR 6, but should still work.

 

[Amazingmg]

Knowledgebase ID 27597

I used it on a system we installed at Christmas.

It worked great.