hello, everyone. I have problem about communication using pncan link. In my case communication Digital Input and Digital output is already success. but if i sending Analog Data (AI) the communication is nothing happen,the value is always on 0.
i don't wanna give up, and i still searching about how to troubleshooting this case. also i already check about PDO, OD, and the type of address used, and also index or subindex used. Then, i really confused because i think the configuration is already correctly.
please help me, and tell me how to troubleshooting this failed communication. thanks a lot for your help.
i don't wanna give up, and i still searching about how to troubleshooting this case. also i already check about PDO, OD, and the type of address used, and also index or subindex used. Then, i really confused because i think the configuration is already correctly.
please help me, and tell me how to troubleshooting this failed communication. thanks a lot for your help.