fatek plc fbs-40ma problem with adcnv

faisalengr

Member
F
Join Date
Nov 2016
Location
karachi
Posts
1
hi,
i want to ask that when i am simulating my program in winproladder and try to see the register of adcnv function how its behaving by putting value in source register.

the output register is just not changing and remain on 0.

kindly is there anyone who knows this issue.

thanks
 

Similar Topics

F
Use of in built timers in Interrupt Service Routine-FATEK FBs Series PLC
Dear all, I want to use the interrupt service routine in FATEK PLC using WinproLadder Software. I had configured the interrupt in software as...
2
Replies
17
Views
1,599
drbitboy
drbitboy
A
How to create floating point register in Fatek Fbs PLC?
Hi; I have been the user of Allen Bradley PLCs but now working on programing of Fatek FBs PLCs. I want to know how do I create a floating point...
Replies
0
Views
2,123
AB2005
A
P
FATEK PLC FBs-60MC need help
Hello all! We are using a FATEK PLC FBs-60MC model, and when we tried to connect with our WinProllader software to check the PLC program, there is...
Replies
1
Views
1,640
roxtech
R
M
Pulse Generation using Fatek FBS-20 MCT PLC
Hello I want to generate a continous Pulse Train Output at a certain frequency using Y0 output of Fatek FBS-20 MCT PLC for a Stepper Motor...
Replies
1
Views
1,905
Geoff White
G
D
Help! Fatek PLC FBs-60MA upload prg
Hi, I am trying to upload the program from the PLC to the PC using the Winproladder software. When I click the On-line under PLC, the following...
Replies
1
Views
3,194
gclshortt
gclshortt
Back
Top Bottom