Fault In Proximity Sensor!

Thank you everyone,

I get an idea about prox and motor fault and I am going to write a ladder logic and see how it goes!

Thank you for all advice above and sorry if I couldn't reply to individuals!

Have a good day!
 

Similar Topics

P
PowerFlex 525 Fault Input Anomaly
All, I have a PowerFlex 525 driving an agitator motor. The goal is to have the agitator start automatically after a power loss or a comm loss. I...
Replies
2
Views
76
plcgrasshopper
P
E
1747-sn FAULT
hello I am getting a 57h fault - Specialty I/O module has not responded to a lock shared memory command within the required limit. Fault randomly...
Replies
2
Views
95
Etech883
E
K
Kinetix configuration fault Command Notch Filter Width Undefined attribute
Kindly, we have the following configuration fault on a Kinetix 5700 axis. It only appears when we go online on the Plc. We are just starting the...
Replies
2
Views
107
Kataeb
K
B
Kinetix 5300 MSO causing ExcessiveVelocityErrorFault
Have a system that has been running for over a year and all of a sudden getting a ExcessiveVelocityFault on one of the drives when the MSO command...
Replies
2
Views
156
padees
P
M
clear GE FAUNC PLC series 90-30 fault
Hi, Experts: We have 20 + years old GE PLC series 90-30 stop running (the run led not on and battery led not on) and HMI showing that "PLC has...
Replies
7
Views
206
Steve Bailey
Steve Bailey
Back
Top Bottom