manmeetvirdi
Member
Hi there
I got confused so this question:
I have got thermocouple connected to the AI.
Iam using FC105 to scale the values into Engineering value "Centigrade"
Doubt is: FC105 asks for Hi limit and Low limit, so how can I determine the Hi Limit value??
Hi Limit = Actual high value expected in process
Hi Limit = Actual high value which thermocouple can register
Hi Limit = Set it by trial & error method
Thnaks for the time,
regards
Manmeet
I got confused so this question:
I have got thermocouple connected to the AI.
Iam using FC105 to scale the values into Engineering value "Centigrade"
Doubt is: FC105 asks for Hi limit and Low limit, so how can I determine the Hi Limit value??
Hi Limit = Actual high value expected in process
Hi Limit = Actual high value which thermocouple can register
Hi Limit = Set it by trial & error method
Thnaks for the time,
regards
Manmeet