FESTO FPC101B Software

[drplc]

I have a custom pad printer for product marking that has a FESTO FPC
101B board level PLC in it. The machine builder says I have to buy the PLC from him but if I had the cable and software I should be able to upload the code and reverse engineer it into a newer PLC. Anybody out there got any ideas? Thanks, in advance, for any help! My work e-mail is [email protected] if you have anything to reply with.

Happy Programming!

 

[Friedrich Haase]

Moin drplc,

the FESTO FPC 101B use compiled code. So the chance to reverse engineer it, is very small. And it's less work to design a complete new program.

BTW, as far as I know, the FPC 101 or outdated and the software is no longer available. Ask your local FESTO rep.

Friedrich

 

[JDV]

Software and Cable to programming FPC-101B

I have a machine that has a FESTO FPC
101B board level PLC in it. Anybody out there have the cable diagram and software to program it. Thanks, in advance, for any help! My work e-mail is selex@axtel.net if you have anything to reply with.