We have older Festo electrical servodrives :
CMMP-AS-C5-11A-P3 and CMMS-AS-C4-3A with profibus interface cards for
control by a Siemens plc.
The standard way to connect a pc for configuring the drives is the RS232 port of the drive. Is it however possible to connect with the pc to the profibus port to do configuration?
CMMP-AS-C5-11A-P3 and CMMS-AS-C4-3A with profibus interface cards for
control by a Siemens plc.
The standard way to connect a pc for configuring the drives is the RS232 port of the drive. Is it however possible to connect with the pc to the profibus port to do configuration?