I learned a couple of things today (empirically) about the 1794-ASB series E adapter that I think should have been mentioned in the manual.
- For 32-point standard addressing, one page tells you to set two particular switches off. On the next page these switches are identified as the baud rate selection and that both off means 'auto detect' - only available on series E. What should be mentioned on the 2nd page is that if you select a specific rate, the adapter reverts to 16-point addressing mode.
- It seems that when in 32-point mode, the adapter can only be configured to start at module group 0. That should be mentioned somewhere.
[/list=1]
...sigh