Hi,
i've write this AOI to send a ControlValue comes from pid and control a valve.
this valve is controlled through analog output.
the rang of analog output is: -10vdc to +10vdc.
the analog output card is 1794-[FONT="]OE12.[/FONT]
[FONT="]
[/FONT]
[FONT="]i'am not sure if the limit are ok.[/FONT]
[FONT="]
[/FONT]
[FONT="]please feedback any correction or suggestion.[/FONT]
[FONT="]thanx
[/FONT]
[FONT="] [/FONT]
i've write this AOI to send a ControlValue comes from pid and control a valve.
this valve is controlled through analog output.
the rang of analog output is: -10vdc to +10vdc.
the analog output card is 1794-[FONT="]OE12.[/FONT]
[FONT="]
[/FONT]
[FONT="]i'am not sure if the limit are ok.[/FONT]
[FONT="]
[/FONT]
[FONT="]please feedback any correction or suggestion.[/FONT]
[FONT="]thanx
[/FONT]
[FONT="] [/FONT]
Last edited: