Hi,
I am working on a project where the entire system uses a floating ground philosophy on the 24VDC side.
We have used fuse terminal blocks for distribution of 24VDC to the external termination panels.
When we tried to test for fuse breakage by removing a fuse on the distribution Terminal blocks, we found that we do not get a fuse breakage LED indication.
Moreover, the voltage measured in the system does not hold steady at +12VDC & -12VDC but keeps fluctuating.
I need advice on why the fuse removal is not being picked up and also whether there are any other methods of testing the same.
Also information whether the fluctuation i have mentioned here is normal to a floating system.
I am working on a project where the entire system uses a floating ground philosophy on the 24VDC side.
We have used fuse terminal blocks for distribution of 24VDC to the external termination panels.
When we tried to test for fuse breakage by removing a fuse on the distribution Terminal blocks, we found that we do not get a fuse breakage LED indication.
Moreover, the voltage measured in the system does not hold steady at +12VDC & -12VDC but keeps fluctuating.
I need advice on why the fuse removal is not being picked up and also whether there are any other methods of testing the same.
Also information whether the fluctuation i have mentioned here is normal to a floating system.