Does anyone here have any exeprience with mass flow sensors? We have a new application where we need to verify air flow in a 12” dia. pipe. The air flow is moving saw dust into a hopper where it is fed into our process. We sometimes have issues with the system clogging up want to have an alarm so we catch it sooner.
I have a found a few probes on the web that will produce a 0-5V or 4-20 mA signal that I can monitor in my PLC. Having never worked with any of them, I know nothing of their reliability.
If anyone has used anything like this, I’d appreciate any insight on which probes have worked well and which have proved to be garbage.
Thanks in advance.
I have a found a few probes on the web that will produce a 0-5V or 4-20 mA signal that I can monitor in my PLC. Having never worked with any of them, I know nothing of their reliability.
If anyone has used anything like this, I’d appreciate any insight on which probes have worked well and which have proved to be garbage.
Thanks in advance.