bgtorque
Member
Is there a way of forcing the comms to re-establish between a CompactLogix Controller and a PanelView PLus 600 HMI from RSLogix / RSLinx or FactoryView?
I have a situation where when I upate a HMI application and load into the PanelView, when it is booted up all I get for tags read from the PLC is ??????
I cna normally resolve this by powercycling the PLC and/or the HMI. THe trouble is in certain installations it is almost impossible to get round the back and power cycle when things are mounted in cubicles against walls, etc. There must be some way to enact a remote force or reset or even power cycle????
I have a situation where when I upate a HMI application and load into the PanelView, when it is booted up all I get for tags read from the PLC is ??????
I cna normally resolve this by powercycling the PLC and/or the HMI. THe trouble is in certain installations it is almost impossible to get round the back and power cycle when things are mounted in cubicles against walls, etc. There must be some way to enact a remote force or reset or even power cycle????