shooter Member S Join Date Sep 2002 Location duketown Posts 2,711 Dec 22, 2014 #16 why is the load so high, and yes play with the voltage on this 10 Hz, probably it will help, as there is no control of how much is needed, it is assumed by the drive. try to bring down the voltage until the motor stalls.
why is the load so high, and yes play with the voltage on this 10 Hz, probably it will help, as there is no control of how much is needed, it is assumed by the drive. try to bring down the voltage until the motor stalls.
DickDV Member D Join Date May 2002 Location Kalamazoo MI Posts 2,324 Dec 23, 2014 #17 Too hot to touch is not a good test. Usually, the lowest insulation class is usually around 125 degrees C. Water boils at 100 degrees C!!!!!!!!
Too hot to touch is not a good test. Usually, the lowest insulation class is usually around 125 degrees C. Water boils at 100 degrees C!!!!!!!!