AshleyParr
Member
Hi All,
I currently have Factory Talk Asset Centre configured for automated back ups & control. All was fine until i tried setting up a new development PC....
The Asset centre client on the other PC's still works ok, version control & back ups still take place but i cannot get it to work on this one PC.
Im hoping someone here will have some pointers, error log shown below
Any help or suggestions will be massively appreciated
Cheers,
Ash
I currently have Factory Talk Asset Centre configured for automated back ups & control. All was fine until i tried setting up a new development PC....
The Asset centre client on the other PC's still works ok, version control & back ups still take place but i cannot get it to work on this one PC.
Im hoping someone here will have some pointers, error log shown below
Code:
*********************************************
Additional Info:
ExceptionManager.Appbase: C:\Program Files (x86)\Rockwell Software\AssetCentre Client\
ExceptionManager.EnvironmentCurrentDirectory: C:\Program Files (x86)\Rockwell Software\AssetCentre Client
ExceptionManager.MachineName: xxx
ExceptionManager.TimeStampUtc: 21/11/2022 21:03:08
ExceptionManager.FullName: RA.FT.ExceptionManagement, Version=3.0.0.5, Culture=neutral, PublicKeyToken=55624f8ac7c20aa6
ExceptionManager.AppDomainName: RA.FTAC.Client.exe
ExceptionManager.ThreadIdentity:
ExceptionManager.WindowsIdentity: xxx\xxx
*********************************************
*********************************************
Exception 1 of 1:
Type of exception: System.Exception
Publishing 6 custom properties of the exception object
Message:
Data: System.Collections.ListDictionaryInternal
TargetSite: RockwellAutomation.FTAssetCentre.DBLimitationService.DBLimitationDataModel GetAllConfigData()
HelpLink: NULL
Source: RockwellAutomation.FTAssetCentre.DatabaseLimitation
HResult: -2146233088 (0x80131500)
*********************************************
**** Stack Trace *****
at RockwellAutomation.FTAssetCentre.DatabaseLimitation.DBLimitationWebServiceClient.GetAllConfigData()
at RockwellAutomation.FTAssetCentre.ArchivePlugin.ArchivePlugin.Init()
at RockwellAutomation.FTAssetCentre.Client.Personality.CorePersonality.AppController.StartPlugins(IApplication1 app)
at RockwellAutomation.FTAssetCentre.Client.Personality.CorePersonality.FTAssetCentreHost.PostLoginInit()
at RockwellAutomation.FTAssetCentre.Client.Personality.CorePersonality.FTAssetCentreHost.Connect(IApplication1 app, IState1 state)
Any help or suggestions will be massively appreciated
Cheers,
Ash