GE Fanuc PLC 90 Series and Cimplicity 8.0

[paramesium]

Hi All,

I have just started using GE PLC and wish to check for some information.

I was able to connect to my 90 - 70 PLC with COM1.

I would like to know if this communication would work with Cimplixity 8.0 SCADA, if yes, is there any tutorial source available online?

Please advise, thanks in advance!

Best Regards,
Loo

 

[RussB]

You can do that.
You will find information here: http://support.ge-ip.com/support/index?page=prodhome&cat=HMISCADACIMPLICITY