jcraft
Member
Hi all,
Never did this before so please advise on this. Have a GE 90-30 PLC CPU 363 comm. with an HMI running Cimplicity. The operator inputs a dip depth into the HMI to adjust the depth an axis will dip. This number gets dumped into a %R register. Now, if I want to limit this depth to a certain value other than what the operator has input if a sensor is made on the machine can I just do a move instruction when the sensor is made which will move this new value into the register and overide the other value. If so, when the sensor is not made how will the old value get back into the register. Would the operator just need to input it again on the HMI. Thanks
Never did this before so please advise on this. Have a GE 90-30 PLC CPU 363 comm. with an HMI running Cimplicity. The operator inputs a dip depth into the HMI to adjust the depth an axis will dip. This number gets dumped into a %R register. Now, if I want to limit this depth to a certain value other than what the operator has input if a sensor is made on the machine can I just do a move instruction when the sensor is made which will move this new value into the register and overide the other value. If so, when the sensor is not made how will the old value get back into the register. Would the operator just need to input it again on the HMI. Thanks