GEO SCADA Changing the Alarm Limit Values on MIMIC by users

mahmoud shahien

Member
M
Join Date
Dec 2013
Location
New Damietta city
Posts
34
Dear Experts,
I'm just started working with GEO SCADA and I need your valuable help.
Currently, I'm trying to edit the alarm limits on MIMIC but I can't find any proper solution for this problem.
I can read the alarm limit value but I can't edit it through MIMIC.
So, any proper method to solve this problemo_O.
Thanks.
 

Similar Topics

M
GEO SCADA scheduling the polling data for multiple DNP3 outstations
Dear Experts, Thanks in advance for your kind help. I have a GEO SCADA expert 2022 and configure it as a DNP3 master, also I have multiple DNP3...
Replies
0
Views
606
mahmoud shahien
M
J
Geo SCADA tags from SCADApack
Hi all, I am trying to bring in some alarm tags from a SCADApack plc to a Geo SCADA system. The system is existing and configured with working...
Replies
0
Views
1,900
jj2500
J
ZestyMozzarella
Delta Tau PMAC Geo Drive 480VAC
Hi everyone, was hoping I could inquire with the community as I'm stuck in quite a bind. I have a Delta Tau PWM drive model number GPH1020000...
Replies
1
Views
1,489
Peter Nachtwey
Peter Nachtwey
M
Vigeo Designer with Redundant PLC
Dear All, I need to configure the vijoe designer so that the Shneider HMI can communicate with Hot standby (redundant PLC), the communication...
Replies
10
Views
2,687
tragically1969
T
M
SCADA network extension to remote sites
So I'm pretty new around here but I come looking for advice or suggestions to research. Im the plant electrician/SCADA guy for a warer department...
Replies
8
Views
208
BeepBob
B
Back
Top Bottom