Gt1020 programme

muds

Member
M
Join Date
Apr 2014
Location
karachi
Posts
71
hi freinds..!
i am using gt1020 to interface it with fx1s plc.. i just need graphical interface on HMI that the operator my increase or decrease its timming according to need,,

so my questions are,,
1-is that kind of simple graphical interface possible with mentioned HMI,,
2-I cant find any software to progrrame HMI,,any trial version or software available that solve my probelm,,

Thanks adavence
 

Similar Topics

A
GT1020-LBL to Keyence PLC (Mitsubishi HMI to PLC other brands)
Good day, I have a Mitsubishi HMI (GT1020-LBL, RS-422 connection interface). I'm going to use a Keyence PLC. Is it possible to communicate? Or...
Replies
1
Views
3,778
Andreik
A
D
Mitsi GT1020-LBD2 Micro HMI
Greetings, I have a Mitsi GT1020-LBD2 mirco HMI which I am looking to connect to a Mitsi FX0N PLC. Does anybody have any ideas on the cable...
Replies
1
Views
2,741
TyconAutomation
T
S
Omron RS422C(CP1L) communicate with GT1020 LBL Touch screen.
Hi, Does Omron RS422C(CP1L) able to communicate/interface link with GT1020 LBL Mitsubishi Touch screen? If yes, what are the plc command need to...
Replies
0
Views
2,458
sunnycity
S
M
Horner MiniOCS to Mitsubisihi FX1S/GT1020 Conversion
New to the forums and new to programming as well. Working with a Mitsubishi FX1S-14MR-ES/UL (120VAC base unit, 8 inputs/6 outputs) and the 3.7"...
Replies
1
Views
2,938
Pierre
Pierre
D
Allen Bradley Flex I/O erreur programme
Hello friends, I preferred to make a new post because the subject is not the same and I will see in time if my situation is good to put the old...
Replies
10
Views
2,548
dawars
D
Back
Top Bottom