hardware differs in Simatic... even after download

userxyz

Member
U
Join Date
May 2002
Location
any
Posts
2,768
Hi,

Weird problem:

I have downloaded the hardware config, but when we do a compare the SDB differs:

Naamloos.png

We have this issue on several PLC's.

Someone had this problem too ?
How to solve this ?

Thanks,
Kind regards,
C
 

Similar Topics

Itshouldwork
A way to detect online, hardware and software changes of Siemens TIA Portal V17
Hi PLC people, think about this scenario: The PLC is somehow connected to the same network with the facilities` network. Then someone connects to...
Replies
2
Views
103
mk42
M
TheWaterboy
MSG Scope determined by hardware?
I have an 1769-L16ER that I use to test code and I just found that I can't create MSG tags at the local program scope - they have to be done at...
Replies
4
Views
214
TheWaterboy
TheWaterboy
D
Hardware Configuration Changes to Live Siemens System
Hi all, This is going to be a long post apologies. I'm also a complete beginner to the world of PLCs. I'm currently working on my first ever...
Replies
10
Views
496
mk42
M
R
Exploring Alternative PLC Hardware: Seeking Recommendations and Insights
Greetings All, I recently decided to start freelancing in Controls and Automation part time, most of my experience has been with Rockwell...
Replies
2
Views
171
OkiePC
OkiePC
J
Beckhoff hardware mismatch
hello, I am using Beckhoff with TwinCAT3 and when I change or add some new hardware or for any reason, there is a mismatch in the real hardware vs...
Replies
1
Views
140
AlfredoQuintero
A
Back
Top Bottom