HC900 PID Block

archy

Member
A
Join Date
Jul 2014
Location
California
Posts
52
Hi,

I am using a PID block in an HC900 and the WSP is different from the RSP that I am feeding it. Why is that and how do I get the WSP to track along with the RSP?
 

Similar Topics

E
Honeywell HC900 PID Manual Input
Hello Guys, I'm working on Honeywell HC900. I am using the PID block. I have attached the Switch and loop block to it as well. I have attached a...
Replies
2
Views
642
danw
danw
V
Hc900 pid
Hello everyone ! I read the help tab on the PID function block but I dind't understand. Can someone explain to me ? And how to use setpoints ?
Replies
9
Views
828
MaxK
M
A
HC900 PID Disabling
How do I disable a HC900's PID's output using not the PV to the PID, but a second source?
Replies
5
Views
1,983
archy
A
M
Maintaining variable values through shutdown (HC900)
I'm upgrading an existing machine with a Honeywell HC900 controller, and I'm trying to do some data processing in the controller. I have variables...
Replies
0
Views
71
mike.s
M
V
HC900 Revision 7.2 Error
Hello everyone, My designer software as the 7.200 firmware, but when I go to download to the plc HC900 from honeywell the program I created...
Replies
0
Views
671
_V_
V
Back
Top Bottom