Help for Encoder interfacing with Delta DVP-SC PLc

kam

Member
K
Join Date
Nov 2011
Location
Aurangabad
Posts
9
Hi all,

Happy New Year 2012!!!

Can any body guide me, how to configure Encoder (High Speed Counter) in Delta PLC.

Thanks in advance.
 

Similar Topics

M
Help Math reminder / calculating encoder cnts per unit
This application has a motor with encoder feedback that drives a linear actuator that moves in/out, and is at roughly 45 degs from horiz. As the...
2
Replies
19
Views
1,385
drbitboy
drbitboy
C
Encoder help
Hi, I have a S7-1200 (214-1HG40-0XB0) connected to a SEW Movitrac MCX91A-CFN V4.0 through profinet. Now I have a EZ2Z Singleturn encoder on my...
Replies
7
Views
635
drbitboy
drbitboy
K
HSC/HSL Encoder Help on a Micro1400
Hi everyone, I have a Micrologix 1400 using an HSL instruction (High Speed Counter Load). This instruction is used in junction with an encoder...
Replies
1
Views
827
kstiles1499
K
U
Gray Code encoder to Ethernet help!!!
Hey guys, Although I've poured through this forum for help in the past this is my first post. I am looking at replacing obsolete Baumer IVO...
Replies
6
Views
1,993
Ugsomania
U
C
More encoder help
Hello everyone, I have learned a lot about incremental encoders today. But I am down to one last issue and it's a big one. I have 8 incremental...
Replies
9
Views
1,761
BryanG
B
Back
Top Bottom