Help with ANALOG OUTPUT CARD

Good idea. With a 4-20 mA signal, he should be getting either 1-5V (most common in my experience) or 2-10V. (1V representing 4mA, and 5V representing 20mA, naturally)


-jeff
 

Similar Topics

J
Adding 2nd Analog output card to Mitsubishi. Need coding help
I have a Mitsubishi FX2N-64MR-UA1 processor. The 1st analog output card is an FX2N-4DA. It requires 24VDC power. That card is obsolete. The card...
Replies
1
Views
1,589
parky
P
J
Studio 5000 Analog Output Logic Help
Hey guys, I'm a novice programmer and looking to learn how to create logic for an analog output to control a VFD. I've taking the Logix Designer...
Replies
4
Views
2,095
Jim Diesel
J
T
Analog output metering help
So I've built a PLC trainer with a ML1200 and a 1762-IF2OF2. Im running a signal generator to create the 4-20 for the inputs. If I scale the input...
Replies
13
Views
2,835
TheDude_Abides
T
N
Omron PLC- CJ1W-DA021 Analog output Programming help required
Hi all, I only do PLC Programming on and off and have never done programming analog stuff therefor I need a pointer in the right direction. We...
Replies
3
Views
4,610
gtsuport
G
M
gx developer analog output help
Hi, I'm trying to programme a gradually increasing analog using and fx1n and a fx2nda unit. The output needs to increase over a set period...
Replies
3
Views
1,738
osmanmom
O
Back
Top Bottom