Persephone
Member
Hi im doing a energy saving program for a lamp. And basically the instructions are to turn off the lamp if is not being used ....... but with no sensor.
the lamp have to turn off if one cycle of work have ended (this machine make the weld of a part of the car).
i need help to put that instruction, i have made the "waiting" with a TOF timer but i dont know where to put it in the main program of this weld cycle.
the lamp have to turn off if one cycle of work have ended (this machine make the weld of a part of the car).
i need help to put that instruction, i have made the "waiting" with a TOF timer but i dont know where to put it in the main program of this weld cycle.