IQMaster is used with Reliance Electrocraft series servo units.
DOS based but the latest rev could run under win3.1 or so.
PDM030 also is a Reliance number (30A peak unit).
*.QPS filename is a valid IQ Master file name.
You have to set up as stated above as well as write (loops) programs for your functions.
There's also a bunch of Initialize, E-Stop , Recover and such programs that could be included as part of your main program.
Think of these as sub-routines executed when called.
Haven't touched it in ages but had to do modifications on some units in the field.
Use an old PC if you have one as the newer ones and newer win versions freeze and perform illegal operations when attempting to run IQMaster under windows.
I believe a win2000 pc will be no problem, anything newer won't probably work.
Good luck.
DOS based but the latest rev could run under win3.1 or so.
PDM030 also is a Reliance number (30A peak unit).
*.QPS filename is a valid IQ Master file name.
You have to set up as stated above as well as write (loops) programs for your functions.
There's also a bunch of Initialize, E-Stop , Recover and such programs that could be included as part of your main program.
Think of these as sub-routines executed when called.
Haven't touched it in ages but had to do modifications on some units in the field.
Use an old PC if you have one as the newer ones and newer win versions freeze and perform illegal operations when attempting to run IQMaster under windows.
I believe a win2000 pc will be no problem, anything newer won't probably work.
Good luck.
Last edited: