Hi,
I'm not a siemens expert but we recently converted an old siemens PC into a virtual machine so we could run it on modern hardware. It was just running WinCC R4 with the control centre HMI.
This was using profibus to communicate so we changed it to use TCP/IP and the onboard ethernet port. This was all working fine but I get a license pop up every ten minutes saying I dont have the following license.
Softnet-PG IE Windoes 98, NT 4.0
Order # 6GK1704-1PW30-3AA0
I'm not sure if that relates to the use of the TCP/IP comms driver or if I accidentally activated some functionality I dont need. This is ruunning on windows NT and uses AuthorSW for the licenses. It has about 7 licenses active including the 64K powertags and the 505 TCP/IP license etc.
Can someone give me some advice on why this has started poping up and maybe what license I need to make it go away.
Thanks.
I'm not a siemens expert but we recently converted an old siemens PC into a virtual machine so we could run it on modern hardware. It was just running WinCC R4 with the control centre HMI.
This was using profibus to communicate so we changed it to use TCP/IP and the onboard ethernet port. This was all working fine but I get a license pop up every ten minutes saying I dont have the following license.
Softnet-PG IE Windoes 98, NT 4.0
Order # 6GK1704-1PW30-3AA0
I'm not sure if that relates to the use of the TCP/IP comms driver or if I accidentally activated some functionality I dont need. This is ruunning on windows NT and uses AuthorSW for the licenses. It has about 7 licenses active including the 64K powertags and the 505 TCP/IP license etc.
Can someone give me some advice on why this has started poping up and maybe what license I need to make it go away.
Thanks.