Could you help me please?
I want to communicate a Red Lion HMI (G307K200) with a PLC Direct Logic 06 (D0-06DR).
The supplier of Red Lion recommend me that you use the cables CBLKOY00 and CBLADK08 (Com 3) or CBLADK09 (Com 1).
I manufactured the cables as shown in the attached file, but I not yet been able to establish communication between the two devices. (unsuccessfully).
Attached program of Crimson. Just create the communication (auxiliary port) and an indicator (Y000). The Output Y0 is on and off on the PLC.
Could you help me with your experience please.
Thanks in advance.
Regards.
I want to communicate a Red Lion HMI (G307K200) with a PLC Direct Logic 06 (D0-06DR).
The supplier of Red Lion recommend me that you use the cables CBLKOY00 and CBLADK08 (Com 3) or CBLADK09 (Com 1).
I manufactured the cables as shown in the attached file, but I not yet been able to establish communication between the two devices. (unsuccessfully).
Attached program of Crimson. Just create the communication (auxiliary port) and an indicator (Y000). The Output Y0 is on and off on the PLC.
Could you help me with your experience please.
Thanks in advance.
Regards.