besthaan Member B Join Date Aug 2018 Location korea Posts 1 Aug 21, 2018 #1 hi. i worked in korea , i used this project the fanuc robot. but i don't know how interface , i hope some of tip .
hi. i worked in korea , i used this project the fanuc robot. but i don't know how interface , i hope some of tip .
Iner Member I Join Date Mar 2010 Location France Posts 190 Aug 24, 2018 #2 besthaan said: hi. i worked in korea , i used this project the fanuc robot. but i don't know how interface , i hope some of tip . Click to expand... GSD/GSDML file in the siemens configuration depending on Profibus/profinet. The robot needs to have the corresponding communication module. Then check FANUC documentation about UOP to know how to use it in the PLC program.
besthaan said: hi. i worked in korea , i used this project the fanuc robot. but i don't know how interface , i hope some of tip . Click to expand... GSD/GSDML file in the siemens configuration depending on Profibus/profinet. The robot needs to have the corresponding communication module. Then check FANUC documentation about UOP to know how to use it in the PLC program.