how interface fanuc and siemens plc.

[besthaan]

hi.
i worked in korea ,
i used this project the fanuc robot.
but i don't know how interface ,
i hope some of tip .

 

[Iner]

hi.
i worked in korea ,
i used this project the fanuc robot.
but i don't know how interface ,
i hope some of tip .

GSD/GSDML file in the siemens configuration depending on Profibus/profinet.


The robot needs to have the corresponding communication module.


Then check FANUC documentation about UOP to know how to use it in the PLC program.