Hi everyone,
I have a Siemens PLC and a CP. I have several devices connected via profinet on the CP PN/IO port.
I also connected the G-BIT port of the CP wit my PLC.
I think there should be a way for me to ping the G-BIT and consequently all the devices that are connected to the CP via profinet.
Currently I am able to ping my PLC, but not the G-BIT nor the devices.
Could someone explain what am I supposed to do? How should I route these things?
If it matters, the PLC, G-BIT and profinet devices are all on different networks.
I have a Siemens PLC and a CP. I have several devices connected via profinet on the CP PN/IO port.
I also connected the G-BIT port of the CP wit my PLC.
I think there should be a way for me to ping the G-BIT and consequently all the devices that are connected to the CP via profinet.
Currently I am able to ping my PLC, but not the G-BIT nor the devices.
Could someone explain what am I supposed to do? How should I route these things?
If it matters, the PLC, G-BIT and profinet devices are all on different networks.