Brand new to Allen-Bradley. Trying to connect a Simatic ET 200SP to an Allen-Bradley plc and can't figure out the device configuration. It does not exist in the module type list so I assume it needs to be a generic ethernet module. If that's the case, how do I determine the comm format and connection parameters? If not, what should I be doing instead?
Using:
Studio 5000 Logix Designer V31.00.00
Simatic ET 200SP IM 155-6PN ST
Using:
Studio 5000 Logix Designer V31.00.00
Simatic ET 200SP IM 155-6PN ST