Hello Expert,
I am working on a project that will interface Modicon M340 Plc and Citect version 7.4.
I have tested my PLC program and it is working fine.
Also I have setup my citect server and the configuration is fine.
My challenge is the I/O addressing.
Kindly assist me on how I will enter my input and output address which I have on my M340 in the citect server variable tage.
for example,
How to label the input (%10.1.32) in my citect variable tag.
Also how to label the output (%Q0.2.22) in my citect variable tag
I am working on a project that will interface Modicon M340 Plc and Citect version 7.4.
I have tested my PLC program and it is working fine.
Also I have setup my citect server and the configuration is fine.
My challenge is the I/O addressing.
Kindly assist me on how I will enter my input and output address which I have on my M340 in the citect server variable tage.
for example,
How to label the input (%10.1.32) in my citect variable tag.
Also how to label the output (%Q0.2.22) in my citect variable tag