How to create radio buttons in Factorytalk View ?

PLC1234

Member
P
Join Date
Nov 2020
Location
CA
Posts
5
I need to let people to select 1 out of 5 options. I don't see any radio buttons in the Factorytalk View ? Is there any workaround?
 

Similar Topics

TheWaterboy
Can I create a loop with hardwired DH+ and Radio DF1?
I have a pump house and a tank well over a mile apart. The pump house is hardwired to the tank via direct buried telco cable. Mind you this was...
Replies
7
Views
2,737
TheWaterboy
TheWaterboy
S
How to create connection from PLC to VFD with ethernet cable?
Hello, I've been trying to learn this a while now and still have not found out how this works. I have an Omron CJ2M PLC and an ABB ACS 355 VFD...
Replies
1
Views
264
jschulze
J
C
[iFix] - Most efficient way to create multiple alarms
Hello, I have to deal with iFix again and am looking at the most efficient way to create alarms to display in iFix, i.e. not creating an...
Replies
0
Views
166
cardosocea
C
V
Can't create and application in Aveva Intouch application manager 2023
Good morning to all, I have the following issue, I installed everything of intouch including the patch, it is the 2023 version. The...
Replies
0
Views
346
_V_
V
D
Error 716-8002801D (Failed to Create project file)
So, I finally got versioin 27 installed on my Windows 10 VM. However, now I can't upload a project from my lab controller. I have the above error...
Replies
0
Views
1,139
desertsurf520
D
Back
Top Bottom