How to implement 10 Power X in GxWorks2

mahadev

Member
M
Join Date
Sep 2016
Location
Bangalore
Posts
4
Dear friends,

I'm using Mitsubishi FX3G PLC and GxWorks2 Software for programming.

I need to implement 10 power X (X is a +/- floating value).

I'm not finding any instruction.

Looking forward for your reply.

Regards
Mahadev
 

Similar Topics

E
Is SLMP protocol for fx5u difficult to implement
Dear all, I want a communication between pc and fx5u. I am considering SLMP protocol. I think it is well documented. But many of the third party...
Replies
0
Views
16
efratalove
E
S
How to implement a thermal protection of braking resistor?
Let's say I have an inverter fed three phase induction motor drive where in the braking phase (when the motor operates in a generator mode) the...
Replies
2
Views
147
JesperMP
JesperMP
M
How to properly implement Safety Relay for application
I want to improve a semi custom product I am delivering to a customer with implementation of safety relays. The system is fairly simple with just...
Replies
5
Views
594
I_Automation
I_Automation
A
How do we implement a cycle call function for the SLC 500?
I'm struggling to implement the test case which is highlighted. What ends up happening is the servo starts when I turn the cycle on, but it...
Replies
3
Views
1,077
5618
5618
A
How to implement FIFO in easysoft?
I am trying to implement FIFO for filling tanks in the order it went empty in easysoft or some of you might know it by easydoft 7. I am trying to...
Replies
2
Views
2,318
parky
P
Back
Top Bottom