how to sync two servo drives??

vjsasi

Member
V
Join Date
Sep 2022
Location
india
Posts
11
hi everyone,i am trying to synchronous two servo motors (in my case fujii alpha5 smart as main drive and sigma SG AS servo drive as follower drive ).i have little knowledge in synchronization any ideas for connecting the drives?
im trying to connect them with ethernet cables but i dont know how they communicate and how they exchange speed and position data.any ideas ?please help

thank you

alpha5 smart drive manual

https://www.fujielectric-europe.com..._smart_user_s_manual_english_24c7_e_0016c.pdf

sigma servo manual

http://www.zealautomation.in/wp-content/uploads/2018/08/SIGMA-SG-AS-DRIVER-MANUAL.pdf
 

Similar Topics

J
Sync encoder speed (freq) to servo speed
HI, I have an encoder of 10000 PPR and it has been coupled to 40 mm couppler(roller) and that couppler is running over belt. This belt is...
Replies
0
Views
2,724
JAGDEESH N ODANAVER
J
C
How to Time Sync? S7-400H CPU (Time Master) With Wincc Runtime V7.5(Time Slaves)
hello s7-400h and wincc are connected to each other via Ethernet. I need help on how to do time synchronization
Replies
0
Views
65
Controller5848
C
B
Studio 5000 - Time Sync Grandmaster Priority - Control Sync and Module Connection Faults
I have to start out by saying I am not a PLC programmer and I have basic programming skills but mainly use software as a troubleshooting tool. I...
Replies
0
Views
140
Bobcat22
B
A
Different Drivers and motors motion sync in Rockwell Studio 5000
Hi currently my existing PLC using AB motor & driver to spin production, however customer want to another set, if this possible we use different...
Replies
1
Views
241
robertmee
R
B
AOI to sync slave controller clock to master controller clock messaging question
Hello, I am trying to create an AOI that will retrive the clock datetime bits from a master plc through a generic message read instruction and...
Replies
2
Views
505
Contr_Conn
Contr_Conn
Back
Top Bottom