DLMUK
Member
Hi,
For my university project I am going to design a hydraulic test machine and the associated control system.
The area of the design I am focusing on is the control system, value control, program within a PLC/HMI for operation and the electrical installation of it.
I am not too concerned with the mechanics and I am working with a mechanical engineer who will take care of safety factors etc.
What I am after is any ready material which may be relevant to understand the best practices for things like valve selection, automated control of values, dealing with overpressure/failure scenarios and pressure release etc.
I have done a scout around on google but cannot find books which are specific to this, I suppose this may be because it is too niche but thought I would ask here?
thanks.
For my university project I am going to design a hydraulic test machine and the associated control system.
The area of the design I am focusing on is the control system, value control, program within a PLC/HMI for operation and the electrical installation of it.
I am not too concerned with the mechanics and I am working with a mechanical engineer who will take care of safety factors etc.
What I am after is any ready material which may be relevant to understand the best practices for things like valve selection, automated control of values, dealing with overpressure/failure scenarios and pressure release etc.
I have done a scout around on google but cannot find books which are specific to this, I suppose this may be because it is too niche but thought I would ask here?
thanks.